DÜZCE

The Auger Turbine has been used in many
fields such as mining, shipping and agriculture for centuries and is still in use today. The Auger
Turbine is a
device for extracting water from a low place to a high place and is known to have been used in the past
to empty ship holds. In this device, the water in the pool is transported to the upper reservoir by
Auger Turbine.

It is a device about dams and hydroelectric energy. When the turbine turns, the street lamps on the model light up. The process of electricity generation in dams is understood. When the dam lid is slid up, the leds in a row light up and the turbine rotates. When the lid is pulled down, the leds turn off and the turbine stops moving. If the dam lid stays up for more than 1 minute, the led light and turbine movement will stop and will be activated when the lid is moved again.

When the visitor makes the correct matching at any intersection by turning the discs, the green led will light up in the relevant area will be warned.When it is wrong, it will be red.Both lights will be lit thanks to the correct alignment of 4 correct visuals along a line.Then, on the screen at the station, the process from planting the seed that the visitor has matched from planting to germination, from growing to harvesting and from processing to coming to our table will be presented with an accelerated video.

Mr. Robot can move forward and backward, in all directions, move with his shoulder and elbow joints, turn his head and make any sound. With him you can greet your guests and make presentations to little curious eyes. It can be programmed through a computer and has a Bluetooth connection. Various movements and conversations can be controlled with the remote control device.

Visitors follow the instructions on the screen and perform water management in the field. For example, in irrigation with drones, after marking the areas to be irrigated on the screen, the drone model on the wall moves on the track to scan the area. Relationships are established between the physical environment and the digital environment. The required amount of irrigation is applied to the areas indicated on the screen. Plant sensors, smart irrigation system, weather station and drone data are used. The drone will be moving and other products will be included in the physical display with led lights.

Thermal camera is an imaging system that detects heat
energy (infrared radiation) that is invisible to the eye as an imaging method and converts its structure into colors and shapes
formed according to heat energy.
In the setup, the image detected from the thermal camera is observed on the screen placed on the large case
, you can monitor the hot
and cold parts of your body.

Visitors can select the parts of the windmill from the application in the kiosk and get information about it and learn about the factors affecting it. At the same time, an iconic photo can be taken with the flour sacks and hand mill models around the windmill.